top of page

Stable door - upper section, part 6

The next thing to do was to copy the Moon symbol onto the door. I laid out all the relevant pieces into position to make sure everything was as it should be. I then removed the glass and marked the door by drawing against the holes of the window frame.


I then put all the pieces away again, then cut the holes.


After that, I sanded the edges as I had the window frame. I lined the frame up on the door and made sure all the holes matched up.


I then tinted the glass using an automotive tinting film.


80 views2 comments

Recent Posts

See All

Stranded

2 comentários


Wizard Steve
Wizard Steve
26 de dez. de 2020

Thank you. Likewise, stay safe and well

Curtir

I enjoy reading your posts and always look forward to the next installment. I do have to go back and catch up on a couple of them that I missed when Covid hit my inner circle again. Stay safe and healthy Steve!!

Curtir
bottom of page